3 KVA Single Phase Servo Voltage Stabilizer

Specifications

Make	Desta
Type	Indoor Floor Mounting
Capacity	1 KVA to 150 KVA
Input Voltage	As Per Customer Requirement
Output Voltage	230/240 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage
Input/Output Connection	Terminals of suitable rating
Correction Rate	15-25 volts/ Sec
Suitability	Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load
Compatibility	Use with Mains and DG set
Environment	Designed for Indoor Tropical Use
Ambient	10 to 50 deg. C RH 95%
Insulation Resistance	<6 Mega Ohms at 500V DC
Dielectric Test	1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components
Auto/ Manual operation	Provided
Efficiency	>95%
Wave form Distortion	Nil
Visual Indications	Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff
Nature of Cooling	Air Cooled / Oil Cooled
Response Time	10 m sec
Control	Through Micro Controlled Digital Circuit
Reference Standard	IS-9815, IS-2026
Production Capacity	60 Pcs./ Month

Additional Information

Details

Basic components of Servo voltage stabilizer are:
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.

Salient Features

Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.