550 KVA Three Phase Servo Voltage Stabilizer

Specifications

Power	550 kVA
Type	Automatic, Manual
Production Capacity	30 Pcs. / Month
Input Voltage	340 - 480 Volts.
Output Voltage	415 Volts. + - 1%
Cooling Type	Oil Cooled
Frequency	50 Hz
Efficiency	96%
Warranty	1 Year
Speed Correction	15 to 25 Volts. / Second
Mounting	Indoor Floor Mount
Display Type	Digital
Input Frequency	50 Hz
Response Time	10 ms
Brand	DESTA
Phase	Three Phase
Is It Portable	Portable
Output Frequency	50HZ
Body Material	Steel
Speed Of Correction	15 to 25 Volts. / Second
I deal in	New Only
Wave Form Distortion	Nill
Reference Standard	IS-9815, IS-2026
Control	Through Micro Controlled Digital Circuit
Visual Indications	Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off
Wave form Distortion	Nil
Dielectric Test	1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components
Insulation Resistance	<6 Mega Ohms at 500V DC
Ambient	-10 to 50 deg. C RH 95%
Environment	Designed for Indoor Tropical Use
Compatibility	Use with Mains and DG set
Suitability	Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load.

Additional Information

Basic components of Servo voltage stabilizer are

Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.

Salient Features

Wave Shape distortion-nil.
95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
Immune to load PF and supply frequency variation.
Power losses 2% maximum.
Duty cycle continuous.
Life expectancy 15-20 yrs.
Operation-Auto/Manual.
Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
High quality EHV grade oil as per IS-335.
Reference Standard IS-9815, IS-2026.