600 KVA Three Phase Servo Voltage Stabilizer


600 KVA Three Phase Servo Voltage Stabilizer

Specifications

Type Manual
Frequency 50 Hz
Phase Three Phase
Power 600 KVA
Production Capacity 30 Pcs. / Month
Cooling Type Oil Cooled
Brand DESTA
Input Voltage 340 - 470 Volts.
Output Voltage 415 Volts. + - 1 %
Display Type Display
Efficiency 96%
Oil Quantity 900 Ltrs.
Response Time 10 Ms
Reference Standard IS-9815, IS-2026.
Control Through Micro Controlled Digital Circuit.
Visual Indications Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off.
Wave form Distortion Nil
Dielectric Test 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components
Insulation Resistance <6 Mega Ohms at 500V DC.
Ambient -10 to 50 deg. C RH 95%
Environment Designed for Indoor Tropical Use
Compatibility Use with Mains and DG set
Suitability Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load.

Additional Information

Product Code P1010
Min. Order Quantity 1 Piece(s)
Delivery Time 5 to 10 Days

Basic components of Servo voltage stabilizer are
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.

Salient Features

  • Wave Shape distortion-nil.
  • 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
  • Immune to load PF and supply frequency variation.
  • Power losses 2% maximum.
  • Duty cycle continuous.
  • Life expectancy 15-20 yrs.
  • Operation-Auto/Manual.
  • Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
  • High quality EHV grade oil as per IS-335.
  • Reference Standard IS-9815, IS-2026.

Yes! I am interested






Looking for "600 KVA Three Phase Servo Voltage Stabilizer" ?