-
destaelectricals@yahoo.co.in -
View Mobile Number - Send SMS
- Send Email
- GST No. 09AWFPS6912E1ZC
Three Phase Servo Voltage Stabilizer
Leading Manufacturers, Exporters, Wholesaler and Retailer of 15 KVA Three Phase Servo Voltage Stabilizer, 150 KVA Three Phase Servo Voltage Stabilizer, 20 KVA Three Phase Servo Voltage Stabilizer, 200 KVA Three Phase Servo Voltage Stabilizer, 25 KVA Three Phase Servo Voltage Stabilizer, 250 KVA Three Phase Servo Voltage Stabilizer, 300 KVA Three Phase Servo Voltage Stabilizer, 350 KVA Three Phase Servo Voltage Stabilizer, 400 KVA Three Phase Servo Voltage Stabilizer, 50 KVA Three Phase Servo Voltage Stabilizer, 500 KVA Three Phase Servo Voltage Stabilizer, 550 KVA Three Phase Servo Voltage Stabilizer, 600 KVA Three Phase Servo Voltage Stabilizer, 630 KVA Three Phase Servo Voltage Stabilizer, 750 KVA Three Phase Servo Voltage Stabilizer, 850 KVA Three Phase Servo Voltage Stabilizer, 40 KVA Three Phase Servo Voltage Stabilizer and 450 KVA Three Phase Servo Voltage Stabilizer from Mathura.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Phase | 3 Phase |
| Input Voltage | 300 - 470 Volts |
| Output Voltage | 415 Volts. +- 1% |
| Cooling Type | Dry Type, Air Cooled |
| Production Capacity | 60 Pcs./ Month |
| Capacity | 15 KVA |
| Frequency | 50Hz |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. / Sec. |
| Output Cutoff | 250 Volts |
| Mounting | Indoor Floor Mount |
| Display Type | Digital |
| Input Frequency | 50Hz |
| Brand | DESTA |
| Efficiency | >95% |
| Response Time | 10 ms |
| Is It Portable | Portable |
| Body Material | Steel |
| Is It ISO Certified | ISO Certified |
| Is It Over Volt Protection | Available |
| Number Of Wheels | 4 Wheels |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off. |
| Wave form Distortion | Nil |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components. Auto/ Manual operation: Provide |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load |
| Correction Rate | 15-25 volts/ Sec |
| Product Code | D15300 |
| Delivery Time | 3 to 5 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | 340 - 470 Volts. |
| Output Voltage | 415 Volts. +- 1 % |
| Cooling Type | Oil Cooled |
| Production Capacity | 15 pcs./ month |
| Oil cooled | 150 KVA |
| Frequency | 50Hz |
| Efficiency | >95% |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. / Sec. |
| Output Cutoff | 250 Volts |
| Mounting | Indoor Floor Mount |
| Input Frequency | 50Hz |
| Display Type | Digital |
| Response Time | 10 m sec |
| Surge Protection | With Surge Protection |
| Is It Portable | Portable |
| Body Material | Body Material |
| Phase | 3 Phase |
| Correction Speed | 15 to 25 Volts. |
| Is It ISO Certified | ISO Certified |
| Is It Over Volt Protection | Available |
| Number Of Wheels | 4 Wheels |
| Brand | DESTA |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off |
| Wave form Distortion | Nil |
| Auto/ Manual operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG Set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load |
| Product Code | D300150 |
| Delivery Time | 3 to 5 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Automatic |
| Phase | Three Phase |
| Input Voltage | 290 - 470 Volts. |
| Output Voltage | 400 Volts. +- 1% |
| Correction Rate | 25 volts/ Sec |
| Production Capacity | 100 Pcs. / Month |
| Line Frequency Variation | 50Hz +- 3% |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Response Time | 10 M Sec |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off |
| Wave form Distortion | Nil |
| Efficiency | >95% |
| Auto/ Manual Operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load |
| Product Code | DSVS2920 |
| Delivery Time | 3 to 4 Days |
basic components of servo voltage stabilizer are
- buck boost double wound transformer.
- suitable toroidal wound variac.
- geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- microcontroller digital display control card.
- these entire components are interconnected to form servo voltage stabilizer.
salient features
- wave shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality crgo lamination and 99.9% pure copper.
- immune to load pf and supply frequency variation.
- power losses 2% maximum.
- duty cycle continuous.
- life expectancy 15-20 yrs.
- operation-auto/manual.
- control through micro processor controller/ic based solid state plug in type glass epoxy control card.
- high quality ehv grade oil as per is-335.
- reference standard is-9815, is-2026.
.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | 320 - 470 Volts |
| Output Voltage | 415 |
| Product Type | Indoor, Digital |
| Production Capacity | 3 / Week |
| Type | Manual,Automatic |
| Condition | New |
| Capacity | 200 KVA |
| Efficiency | 95% |
| Frequency | 50 Hz |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. per Second |
| Display | Digital |
| Mounting | Indoor Floor Mount |
| Input Frequency | 50 Hz |
| Meter Type | Digital |
| Response Time | 10 ms |
| Cooling | Oil Cooled |
| Is It Portable | Portable |
| Automatic Grade | Automatic |
| Output Frequency | 50HZ |
| Body Material | Steel |
| Phase | Three Phase |
| Product Code | D32200 |
| Delivery Time | 5 to 10 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Automatic |
| Condition | New |
| Frequency | 50 Hz |
| Automatic Grade | Automatic |
| Input Voltage | 415 Volts. +- 1% |
| Product Type | Indoor, Digital |
| Efficiency | 95% |
| Warranty | 1 Year |
| Speed Correction | 20 to 30 Volts. per Second |
| Display | Digital |
| Mounting | Floor Mount |
| Input Frequency | 50 Hz |
| Response Time | 10 ms |
| Cooling | Air Cooled |
| Material | Iron |
| Is It Portable | Portable |
| Body Material | Steel |
basic components of servo voltage stabilizer are
- buck boost double wound transformer.
- suitable toroidal wound variac.
- geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- microcontroller digital display control card.
- these entire components are interconnected to form servo voltage stabilizer.
salient features
- wave shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality crgo lamination and 99.9% pure copper.
- immune to load pf and supply frequency variation.
- power losses 2% maximum.
- duty cycle continuous.
- life expectancy 15-20 yrs.
- operation-auto/manual.
- control through micro processor controller/ic based solid state plug in type glass epoxy control card.
- high quality ehv grade oil as per is-335.
- reference standard is-9815, is-2026.
.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | 280 - 470 Volts. |
| Output Voltage | 400 Volts. |
| Brand | DESTA |
| Insulation | F Class |
| Correction Speed | 15 to 25 Volts. |
| Production Capacity | 15 pcs./ month |
| Input Window | 260 - 490 Volts. |
| Output Frequency | 50 Hz |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Response Time | 10 m sec |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off. |
| Wave form Distortion | Nil |
| Efficiency | >95% |
| Auto/ Manual operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load |
| Correction Rate | 15-25 volts/ Sec. |
| Input/Output Connection | Terminals of suitable rating. |
| Product Code | D280200 |
| Delivery Time | 10 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | 280 - 470 Volts. |
| Type | Automatic |
| Power | 300 KVA |
| Output Voltage | 400 Volts |
| Brand | DESTA |
| Production Capacity | 15 pcs./ month |
| Insulation | F Class |
| Correction Speed | 15 to 25 Volts |
| Input Window | 260 - 490 Volts |
| Output Frequency | 50 Hz |
| Wave Form Distortion | Nill |
| Compatibility | Use with Mains and DG set |
| Environment | Designed for Indoor Tropical Use. |
| Ambient | 10 to 50 deg. C RH 95% |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Auto/ Manual Operation | Provided |
| Efficiency | >95% |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Response Time | 10 M Sec |
| Control | Through Micro Controlled Digital Circuit |
| Reference Standard | IS-9815, IS-2026 |
| Product Code | D280300 |
| Delivery Time | 10 Days |
Details
- Basic components of Servo voltage stabilizer are:
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Automatic |
| Phase | 3 Phase |
| Power | 350KVA |
| Input Voltage | As Per Customer Requirement |
| Output Voltage | 230/240 /400 / 415 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage |
| Production Capacity | 15 pcs./ month |
| Brand | DESTA |
| Insulation | F Class |
| Input Window | 240 - 490 Volts |
| Output Frequency | 50 Hz |
| Correction Rate | 15-25 volts/ Sec |
| Speed Of Correction | 15 to 25 Volts.per Sec. |
| Wave Form Distortion | Nill |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Response Time | 10 m sec |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off |
| Wave form Distortion | Nil |
| Efficiency | >95% |
| Auto/ Manual operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components. |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | 10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load. |
| Input/output Connection | Terminals of Suitable Rating |
| Product Code | D260350 |
| Delivery Time | 10 Days |
details
- basic components of servo voltage stabilizer are:
- buck boost double wound transformer.
- suitable toroidal wound variac.
- geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- microcontroller digital display control card.
- these entire components are interconnected to form servo voltage stabilizer.
salient features
- wave shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality crgo lamination and 99.9% pure copper.
- immune to load pf and supply frequency variation.
- power losses 2% maximum.
- duty cycle continuous.
- life expectancy 15-20 yrs.
- operation-auto/manual.
- control through micro processor controller/ic based solid state plug in type glass epoxy control card.
- high quality ehv grade oil as per is-335.
- reference standard is-9815, is-2026.
.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Power | 400 kVA |
| Production Capacity | 30 Pcs. / Month |
| Input Voltage | 260 - 480 Volts. |
| Output Voltage | 400 Volts. + - 1% |
| Cooling Type | Oil cooled |
| Capacity | 400 KVA |
| Frequency | 50 Hz |
| Efficiency | 96% |
| Warranty | 1 Year |
| Speed Correction | 20 to 30 Volts. / Second |
| Display | Digital |
| Mounting | Indoor Floor Mount |
| Input Frequency | 50 Hz |
| Response Time | 10 ms |
| Surge Protection | With Surge Protection |
| Is It Portable | Portable |
| Automatic Grade | Automatic |
| Output Frequency | 50HZ |
| Body Material | Steel |
| Phase | Three Phase |
| I deal in | New Only |
| Brand | DESTA |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off |
| Wave form Distortion | Nil |
| Product Code | P1004 |
| Delivery Time | 5 to 10 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Automatic, Manual |
| Output Voltage | 400 Volts. +- 1% |
| Input Voltage | 280 - 480 Volts. |
| Capacity | 50 KVA |
| Frequency | 50Hz |
| Production Capacity | 10 PCS. / Week |
| Efficiency | > 95% |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. / Sec. |
| Mounting | Indoor Floor Mount |
| Display Type | Digital |
| Input Frequency | 50Hz |
| Response Time | 10 ms |
| Brand | DESTA |
| Correction Rate | 15 to 25 Volts. / Sec. |
| Phase | Three Phase |
| Is It Portable | Portable |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff |
| Wave form Distortion | Nil |
| Auto/ Manual operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load. |
| Product Code | D28050 |
| Delivery Time | 3 to 5 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | 340 - 480Volts. |
| Production Capacity | 25 pcs./ month |
| Type | Automatic, Manual |
| Power | 500 KVA |
| Output Voltage | 400 Volts. +- 1% |
| Cooling Type | Oil cooled |
| Product Type | Indoor, Digital |
| Capacity | 500 KVA |
| Frequency | 50Hz |
| Wave form Distortion | Nil |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff. |
| Control | Through Micro Controlled Digital Circuit |
| Reference Standard | IS-9815, IS-2026 |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Efficiency | 95% |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. / Sec. |
| Mounting | Indoor Floor Mount |
| Input Frequency | 50Hz |
| Response Time | 10 ms |
| Brand | DESTA |
| Is It Portable | Portable |
| Body Material | Steel |
| Product Code | D340500 |
| Delivery Time | 10 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Power | 550 kVA |
| Type | Automatic, Manual |
| Production Capacity | 30 Pcs. / Month |
| Input Voltage | 340 - 480 Volts. |
| Output Voltage | 415 Volts. + - 1% |
| Cooling Type | Oil Cooled |
| Frequency | 50 Hz |
| Efficiency | 96% |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. / Second |
| Mounting | Indoor Floor Mount |
| Display Type | Digital |
| Input Frequency | 50 Hz |
| Response Time | 10 ms |
| Brand | DESTA |
| Phase | Three Phase |
| Is It Portable | Portable |
| Output Frequency | 50HZ |
| Body Material | Steel |
| Speed Of Correction | 15 to 25 Volts. / Second |
| I deal in | New Only |
| Wave Form Distortion | Nill |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off |
| Wave form Distortion | Nil |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load. |
| Product Code | P1012 |
| Delivery Time | 5 to 10 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Manual |
| Frequency | 50 Hz |
| Phase | Three Phase |
| Power | 600 KVA |
| Production Capacity | 30 Pcs. / Month |
| Cooling Type | Oil Cooled |
| Brand | DESTA |
| Input Voltage | 340 - 470 Volts. |
| Output Voltage | 415 Volts. + - 1 % |
| Display Type | Display |
| Efficiency | 96% |
| Oil Quantity | 900 Ltrs. |
| Response Time | 10 Ms |
| Reference Standard | IS-9815, IS-2026. |
| Control | Through Micro Controlled Digital Circuit. |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off. |
| Wave form Distortion | Nil |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC. |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load. |
| Product Code | P1010 |
| Delivery Time | 5 to 10 Days |
Basic components of Servo voltage stabilizer are
Buck boost double wound transformer.
Suitable toroidal wound variac.
Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
Microcontroller Digital display control card.
These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | 360 - 480 Volts. |
| Production Capacity | 30 Pcs. / Month |
| Type | Manual, Automatic |
| Power | 630 KVA |
| Output Voltage | 400 Volts. + - 1 % |
| Capacity | 630 KVA |
| Warranty | 1 Year |
| Frequency | 50 Hz |
| Efficiency | >95% |
| Speed | 8 to 10 Volts. / Second |
| Mounting | Indoor Floor Mount |
| Input Frequency | 50 Hz |
| Display Type | Digital |
| Cooling Type | Oil Cooled |
| Response Time | 10 ms |
| Accuracy | 1 % |
| Brand | DESTA |
| Is It Portable | Portable |
| Body Material | Steel |
| Reference Standard | IS-9815, IS-2026. |
| Control | Through Micro Controlled Digital Circuit. |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cut-off. |
| Wave form Distortion | Nil |
| Auto/ Manual operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use. |
| Compatibility | Use with Mains and DG set. |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load. |
| Product Code | P1006 |
| Delivery Time | 5 to 10 Days |
Basic components of Servo voltage stabilizer are
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Automatic |
| Condition | New |
| Frequency | 50 Hz |
| Input Voltage | 340 - 470 Volts |
| Power | 750 KVA |
| Output Voltage | 415 Volts. +- 1% |
| Production Capacity | 3 / Week |
| Speed Correction | 15 to 25 Volts. per Second |
| Capacity | 750 KVA |
| Product Type | Digital, Indoor |
| Efficiency | 95% |
| Warranty | 1 Year |
| Display | Digital |
| Mounting | Floor |
| Input Frequency | 50 Hz |
| Response Time | 10 ms |
| Brand | DESTA |
| Surge Protection | With Surge Protection |
| Cooling | Oil Cooled |
| Correction Speed | 15 - 25 Volts. per Second |
| Is It Portable | Portable |
| Input Window | 320 - 485 Volts. |
| Output Frequency | 50HZ |
| Product Code | D340750 |
| Delivery Time | 15 Days |
Details
- Basic components of Servo voltage stabilizer are: Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Phase | Three Phase |
| Power | 850KVA |
| Input Voltage | 350-460 Volts. |
| Output Voltage | 415+-1% |
| Product Type | Indoor, Digital |
| Condition | New |
| Capacity | 850 KVA |
| Frequency | 50Hz |
| Efficiency | 95% |
| Warranty | 1 Year |
| Display Type | Digital |
| Response Time | 10 ms |
| Current Type | AC |
| Cooling | Oil Cooled |
| Is It Portable | Portable |
| Automatic Grade | Automatic |
| Body Material | Steel |
| Is It ISO Certified | ISO Certified |
| Brand | DESTA |
| Driven Type | Electric |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Input Voltage | As Per Customer Requirement |
| Power | 40 KVA |
| Output Voltage | 230/240 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage |
| Warranty | 1 Year |
| Display Type | Digital |
| Production Capacity | 30 Pcs./ Month |
| Output Cutoff | Low / High Voltage Cuttoff |
| Mounting Type | Indoor Floor Mount |
| Efficiency | >95% |
| Is It ISO Certified | ISO Certified |
| Brand | DESTA |
| Phase | Three Phase |
| Is It Over Volt Protection | Available |
| Number Of Wheels | 4 Wheels |
| Current Type | AC |
| Reference Standard | IS-9815, IS-2026 |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Response Time | 10 m sec |
| Control | Through Micro Controlled Digital Circuit |
| Wave form Distortion | Nil |
| Auto/ Manual Operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load |
| Correction Rate | 15-25 volts/ Sec |
| Input/Output Connection | Terminals of suitable rating |
| Product Code | D30040 |
| Delivery Time | 3 to 5 Days |
Details
- Basic components of Servo voltage stabilizer are:
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Refezence Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Type | Manual, Automatic |
| Output Voltage | 415 Volts. +- 1% |
| Input Voltage | 360 - 490 Volts |
| Control Type | Micro Controller |
| Production Capacity | 3 Pec. / Week |
| Cooling Type | Oil Cooled |
| Product Type | Indoor |
| Capacity | 450 KVA |
| Efficiency | 95% |
| Frequency | 50Hz |
| Warranty | 1 Year |
| Speed Correction | 15 to 25 Volts. / Sec. |
| Mounting | Indoor Floor Mount |
| Input Frequency | 50Hz |
| Display Type | Anolog |
| Response Time | 10 ms |
| Brand | DESTA |
| Phase | Three Phase |
| Is It Portable | Portable |
| Body Material | Steel |
| Product Code | D360450 |
| Delivery Time | 10 Days |
Details
- Basic components of Servo voltage stabilizer are:
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
